DRIVING BITS

IMG_9448 Liverpool 2 Slot Copper Forward

About Driving Bits

There are many designs of driving bits but generally they can be divided between; Liverpool, Buxton, Elbow and Butterfly Pelham bits and the Wilson Snaffle. All of these are available in a wide range of mouthpieces to accommodate the requirements of the individual horse.

Driving bits will have just one set of reins attached to the bit with perhaps the addition of a Bearing Rein. Being driven, the horse will not have the aids from the rider’s legs and seat.

 

 

 

1/5

TDL15: Rubber Loller Liverpool 3 Slot
Liverpool 3 Slot Rubber Loller
TDL16: Vulcanite Mullen 3 Slot Liverpool
Vulcanite Mullen 3 Slot Liverpool
Copper Forward Arch 2 Slot Liverpool
Copper Forward Arch 2 Slot Liverpool
TDL18: Copper Hartwell Liverpool
Copper Hartwell Liverpool
TDL20: Copper Mullen Fixed Buxton
Copper Mullen Fixed Buxton
TDL21: Hanoverian Copper Rollers Liverpool 3 Slot
Liverpool 3 Slot Hanoverian Copper Rollers
TDL22: French Link Military
French Link Military
TDL23: Swales Port Liverpool 3 Slot
Swales Liverpool 3 Slot
TDL24: Straight Mouth Liverpool 2 Slot
Straight Mouth Liverpool 2 Slot
TDL25: Egg link Liverpool 3 Slot
Egg link Liverpool 3 Slot
TDL26: STST Cherry Roller Liverpool 2 Slot
STST Cherry Roller Liverpool 2 Slot
TDL27: Copper Players Port Mouth Liverpool 3 Slot
Copper Players Port Mouth Liverpool 3 Slot
TDL29: Straight Copper Liverpool 3 Slot
Straight Copper Liverpool 3 Slot
TDL30: Swales Sweet Iron Port Mouth Liverpool 3 Slot
Swales Sweet Iron Port Mouth Liverpool 3 Slot
TDL31: Rubber Port Mouth 3 Slot Liverpool
Rubber Port Mouth 3 Slot Liverpool
Show More

Find What You’re Looking For

COMMON QUERIES

WHAT IF I REQUIRE A VARIATION WHICH ISN'T SHOW IN THE GALLERY?  

If you need a variation not shown on the product pages, we still may be able to make it,  so please don't hesitate to contact us using the contact us pages shown at the top of any page.

WHICH PAYMENT METHODS DO YOU ACCEPT?

We accept many of the major payment methods, such as; Visa, Mastarcard and recently PayPal. 

HOW ARE YOUR DRIVING BITS MEASURED?

The diagram on the right shows you how we measure our bits. For the Liverpool we just need the mouth width and the number of slots. The bit width is especially important to get right. Don't forget we can do mouth piece sizes to the nearest 1/4" so you can be sure to get the right size.

©2021 by A Bit Special